Livestock Crush / Platform Weigh Kits


Flexible and easy to use - up to 4000 kg loads - 2000kg each beam

The AG weighing beams are ideal for mounting under cattle squeeze or treatment shoots and for the construction of weighing platforms made of steel or wood.

Easy to install
The holes and slits on the sides of the beams enable a quick installation. With the adjustable legs differences in level can be compensated. The holes in the contact plates are used to attach the weighing beams to the ground or base.

Robust weighing technology
The AG weighing beams consist of stable tubes and have a 2000 kg nominal load for each beam. The robust legs with 16 mm threads and the elastomer damping elements guarantee a long service life, even under demanding conditions.

Waterproof and fit for stables
The scale is completely dust- and waterproof according to protection class IP68 (can be used under water up to a depth of 1 m) and can thus be installed outdoors, in stables and damp rooms. All parts are made from galvanized steel -stainless option available - see Drop Down Menus

High accuracy
Load cell accuracy is +/- 0.02%.
Weighing indicator resolution is set at 0.5 kg.
Robust, waterproof indicator with animal weighing mode
The AG HD1 weighing indicator has a sturdy galvanized steel casing, is waterproof according to protection class IP67 and can weigh animals automatically.

Delivery contents:
 • 2 weighing beams
 • 4 m weighing signal cable each
 • 1 waterproof screw plug for connection to the weighing indicator
 • 1 AG HD1 weighing indicator
 • User manual

Weighing beams:
 • 2 sturdy, easy to install weighing beams
 • Galvanized steel
 • Beam length: 800 mm
 • Total capacity when built under a self-supporting platform scale: 4000 kg (2000 kg per beam)
 • Adjustable legs with elastomer damping element and robust M16 thread
 • Contact plates for attachment to the ground
 • Total height can be adjusted between 85 and 100 mm
 • 4 m long, treadable, UV-resistant signal cable with waterproof, robust IP67 screw plug

Load cells:
 • 4 high-resolution shear force load cells with 1000 kg nominal load, 3 mV/V, 350 Ohm
 • 4000 kg total nominal load, 120% secure overload, 150% breaking load
 • +/- 0.02% accuracy
 • Waterproof according to protection class IP68
 • Operating temperature: -35 up to +65 °C
 • Temperature compensated: -10 up to +40 °C

Weighing signal cable:
 • 4-pin cable 4 x 0.5 mm2
 • 7.6 mm outer diameter
 • Special coating
 • UV-resistant
 • Small bending radius
 • Treadable

AG HD1 weighing indicator:
 • Galvanized steel casing and mounting bracket
 • Dust- and waterproof according to protection class IP67
 • 6-digit backlit LCD display with 25 mm high digits
 • Auto-zero optional when switching on
 • Manual auto-zero
 • Zero point stabilisation
 • Summation
 • Animal weighing mode with adjustable parameters
 • Energy saving mode
 • Power supply through built-in unit
 • Data transfer via RS-232 interface for large indicator, PC or PLC
 • Battery use possible with 2 x 1.5 V AA
 • Battery cap accessible from outside
 • Dimensions including mounting bracket 258x178x58 mm (WxHxD)

Condition New