Humimeter BLL Biomass / Woodchip Moisture Probe

Product code:

PLEASE NOTE. These products are manufactured in a euro-zone country, due to currency fluctuation within Europe please contact a member of our sales team to confirm prices BEFORE ordering.

An accurate moisture meter with insertion probe for determination of water content of wood chips with dialog and the temperature of deeper layers. The insertion probe is directly mounted on the measuring instrument, so that there is no risk of breaking cables.

There are 2 models available the BLL with data logger and the BLL-USB with data logger and a USB output with data recording and analysis software. Both models are delivered as a complete kit in a wooden case.

The BLL has a 1m probe for measuring deep inside the material.

This unit comes with a Calibration Certificate, the normal factory price is £105,  we also offer a 2nd year calibration check & certificate FOC*

Hold function, manual saving of results, data log for 10,000 logs within measuring point report
Large, well-lit LC display
Automatic temperature compensation
Supplier's data can be recorded
Automatic averaging
Measures material temperature
Temperature can be set to °C or °F as required
Directly mounted insertion probe
Measurement within seconds without prior treatment of samples

Built-In Material Calibrations
Wood Chips 
A mix of different-sized wood chips all LESS THAN 70 mm (2-3/4")
Coarse Wood Chips
Equal-sized wood chips approx. 70 mm (2-3/4")
Industry Wood Chips
A mix of different-sized wood chips all LARGER THAN 70 mm (2-3/4")

Complete Kit
The BLL-KIT is delivered as a complete kit including:
 - BLL gauge,
 - insertion probe,
 - wooden case,
 - steel screw-on handle.

The BLL-USB-KIT is delivered including:
 - BLL-USB gauge,
 - insertion probe,
 - wooden case,
 - steel screw-on handle,
 - USB data output connection,
 - Software & USB cable.

Measuring range -up to 50% water content depending on material (represents 100% wood moisture)
Resolution 0.5% water content
Calibration Accuracy    ± 3 %
Measurement Technique - Resistance, Click for more info
Material Temperature Range 0° - 40° C
(temperature range for determination of water content with temperature compensation)
Temperature Limits  -10°C to 80°C
Menu languages    English, German, French, Italian, Spanish and Russian
Housing - Plastic with rubber protection cover, IP40 rating
Data logger 10,000 moisture measurements plus date, batch & temperature
Data Interface
(BLL-USB only)     USB (supplied with data transfer cable & software)
Display  Graphic LCD display with backlight (128 x 64 pixel)
Temp Compensation  Automatic in °C or °F using built-in temperature probe
Power  4 x 1.5 Volt AA Alkaline batteries
Battery Life 900 measurements
(with auto-off after 6 minutes of non-use)
Shipping Dimensions 15cm x 8cm x 120cm
Warranty 2 years

Batteries - for some reason that the manufacturers cannot understand, readings may be inaccurate when using Duracel batteries. Whilst we are not bringing into disrepute the Duracell name, their battery range or the quality of their products we strongly recommend the use of other brands.
DO NOT use re-chargeable batteries

*2nd year calibration does not include new batteries or carriage to & from our offices. In some instances we are able to carry out on-site calibrations, however, transport and hourly charges will apply.


Condition New